Led Aluminium Board PCB Depaneling Machine , Pcb Lead Cutting
Cutting Lenght :
110V / 220V
85 Kg / 98 Kg .
1.5 M / 2.4 M
Cutting Board :
v-cut pcb board , FR4 board . LED Aluminum board
958*506*333mm / 1020*506*333mm
Cutting Speed :
80,120, 200, 400mm/s
1. Guide can be adjusted vertically to suit different PCB
2. Clearance between the circular blades can be precisely adjusted
with the knob;
3. Upper and lower circular blades can be re-used after regrinding;
4. Shape and sizes of the circular blades can be made according to
PCB lead cutting machine Production Introduction :
1. With unique cutting method , the circuit board is cut by six
blades . It is a group composed of one upper and one lower blade ,
and is also a cutting unit. There are A, B, C, three groups. The
whole cutting process is divided into three stages from group A
blade which cut 40% board then to the group B blade knife cut
through groove cutting by group A to complete another 40% .the last
20% is cut by group C blade and finishing. because each cutting
volume is small, the stress produced during the cutting progress
declined by more than 80% compared with the traditional cut off at
Thus the edge of the board and its surface are very smooth without
warping . Currently, it is the only machine that can guarantee the
aluminum plate without deformation after cutting .
2. because of the multiple cutting, cutting process is very smooth
and greatly improves the capability of position of V-CUT groove .
Even if with shallow slot V-CUT groove the board won t jump out of
blade, avoiding adverse.
3. Because cutting force of the blade is small. abd with high speed
steel material which is imported from the Swedish. durability of
the blade greatly improved , and the lifetime can be one year or
more when cutting the aluminum board.
4. All the cutting blades are calibrated by Excitation
double-frequency laser interference measurement instrument. Ensure
that the latter knife can accurately continue to cut in the slots
which already cut by the former knife.The jitter of knife point is
less than 0.02mm. Ensure perfect cutting quality.